 |   Publisher : Precision Design Company : Precision Our Price: $15.99 |
Features
- Replacement for Canon EW-60C Lens Hood.
- Compatible with Canon EF-S 18-55mm f3.5-5.6 Lens, EF 28-80mm f3.5-5.6 II Lens, EF 28-90mm f4-5.6 II USM Lens, EF 28-90mm f4-5.6 II Lens .
- Prevent unwanted stray light from entering the lens.
- Extra protection from accidental impact.
- Designed to match the specific focal length of the lens.
Product Description
The Precision Design EW-60C Lens Hood is primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Dedicated lens hoods, such as the Canon EW-60C, are designed to match the specific focal length of the lens it was designed for.>> Compatible with the following Canon lenses: Canon EF 28-80mm f/3.5-5.6 Lens, Canon EF 28-80mm f/3.5-5.6 II Lens, Canon EF 28-80mm f/3.5-5.6 III Lens, Canon EF 28-80mm f/3.5-5.6 IV Lens, Canon EF 28-80mm f/3.5-5.6 V Lens, EF-S 18-55mm f/3.5-5.6 Lens, EF-S 18-55mm f/3.5-5.6 II Lens, EF-S 18-55mm f/3.5-5.6 II USM Lens, EF-S 18-55mm f/3.5-5.6 IS, EF 28-90mm f/4.0-5.6 Lens, EF 28-90mm f/4.0-5.6 II Lens, EF 28-90mm f/4.0-5.6 II USM Lens, EF 28-90mm f/4.0-5.6 USM Lens, EF 28-90mm f/4-5.6 III Lens.SimilarProduct
- Precision Design ET-60 Lens Hood for Canon EF 75-300mm f/4.0-5.6 USM, II, II USM, III USM Lenses and Canon EF-S 55-250mm IS Lens
- Tiffen 58mm UV Protection Filter
- Hoya 58mm UV (Ultra Violet) Multi Coated Glass Filter
- Canon Remote Switch RS60 E3
- Fotodiox Dedicated Lens Hood, for Canon EF 50mm f/1.8 II Lens as Canon ES-62
Customer reviews
Percision Design EW-60C Lens Hood for Canon EF S 18-55mm f/3.5-5.6 Lens 
by .. Roger Robertson (Anacortes, Washington USA)
This lens hood is of the same style and quality of the Canon brand. Initial installation on my lens was extra tight, but after several careful installation/removals the fit loosened to a desirable fit. This is a smart choice for photographers on a tight budget. This hood can be installed backwards for an easy way of storing with the lens or just to stow on the lens while the lens is in use when you are shooting situations requiring frequent change of filters/using polorizing filters.
Precision Design EW-60C Lens Hood for Canon EF 28-80mm f/3.5-5.6 I, II, III, IV, V Lens, EF-S 18-55mm f/3.5-5.6 I, II, IS, by .. N. Noah (USA)
Not too much to say, after all, I'm reviewing a piece of plastic. It fits the lens well and does what it is intended to do. The only drawback is that, like most lens hoods, it makes removing the lens cap or a filter a bit more difficult, and although the hood is easy to remove, doing so frequently will likely wear the locking mechanism out. For all you cost-conscious folk out there, it is cheaper than the Canon version, so is a better value.
More than Adequate by .. T. Cogar ()
Pro's:
- Adequate construction (plastic)
- Matte finish inside the hood
- No vignetting on the 18-55 IS stock lens when viewed at 18
- Reverses for storage as expected
- Not insanely overpriced like Canon's hoods
- Works fine with a 58mm Hoya HMC CP filter and lens cap
- Same expected benefits as any other hood
- Not evident as a knock-off product
Con's:
- Felt rather than matte would be preferred inside the hood
- A bit snug on the fit. Not a significant concern.
Purchased my product through Camsdigital which was not a default vendor. They shipped the product the same day.
Lense shade by .. Philip H. Doell III (Johnstown, PA)
I was not sure I would like trhe item. It was not OEM and it was plastic, but I am completely happy with it. It will function just as good as OEM and will last as long too.
Awesome by .. Matthew Pearce (Florida)
Well worth the money...especially with someone who is on a tight budget as myself but still loves photography.